Cisco Systems RVS4000RF manual Installing the Router

Getting Started with the RVS4000 Router	4
Installing the Router

Installing the Router

To prepare the router for installation complete these tasks:

•Obtain the setup information for your specific type of Internet connection from your Internet Service Provider (ISP).

•Power off all of your network hardware, including the router, PCs, and cable modem or DSL modem.

Perform the steps in this section to install the hardware.

STEP 1 Connect one end of an Ethernet network cable to one of the LAN ports (labeled 1-4) on the back of the router. Connect the other end to an Ethernet port on a PC.

STEP 2 Repeat step 1 to connect up to four PCs, switches, or other network devices to the router.

STEP 3 Connect an Ethernet network cable from your cable modem or DSL modem to the Internet port on the back panel of the router.

Cisco RVS4000 Security Router with VPN Administrator Guide 22