Setting Up and Configuring the Router
Firewall
Cisco RVS4000 Security Router with VPN Administrator Guide 56
5
Firewall > Port Range Triggering
Application Name Enter the name of the application you wish to configure.
Triggered Range For each application, list the triggered port number range.
These ports are used by outgoing traffic. Check with the Internet application
documentation for the port number(s) needed. In the first field, enter the starting
port number of the Triggered Range. In the second field, enter the ending port
number of the Triggered Range.
Forwarded Range For each application, list the forwarded port number range.
These ports are used by incoming traffic. Check with the Internet application
documentation for the port number(s) needed. In the first field, enter the starting
port number of the Forwarded Range. In the second field, enter the ending port
number of the Forwarded Range.
Enabled Click the Enabled checkbooks to enable port range triggering for the
relevant application.
Click Save to save your changes, or click Cancel to undo your changes.