Cisco Systems RVS4000RF manual Firewall Port Range Forwarding

Setting Up and Configuring the Router	5
Firewall

Enabled Click the Enabled checkbooks to enable port forwarding for the relevant application.

Click Save to save your changes, or click Cancel to undo your changes.

Firewall > Port Range Forwarding

Firewall > Port Range Forwarding

Application Enter the name of the application you wish to configure.

Start The beginning of the port range. Enter the beginning of the range of port numbers (external ports) used by the server or Internet application. Check with the software documentation of the Internet application for more information if necessary.

End The end of the port range. Enter the end of the range of port numbers (external ports) used by the server or Internet application. Check with the software documentation of the Internet application for more information if necessary.

Protocol Select the protocol(s) used for this application, TCP and/or UDP.

IP Address For each application, enter the IP address of the PC running the specific application.

Enabled Click the Enabled checkbooks to enable port range forwarding for the relevant application.

Click Save to save your changes, or click Cancel to undo your changes.

Cisco RVS4000 Security Router with VPN Administrator Guide 55