Cisco Systems RVS4000RF manual Gateway-to-Gateway VPN Tunnel

D

Gateway-to-Gateway VPN Tunnel

Overview

This appendix explains how to configure an IPSec VPN tunnel between two VPN routers by example. Two computers are used to test the liveliness of the tunnel. These sections are included:

•Before You Begin, page 166

•Configuration when the Remote Gateway Uses a Static IP Address, page 167

•Configuration when the Remote Gateway Uses a Dynamic IP Address, page 172

•Configuration When Both Gateways Use Dynamic IP Addresses, page 177

Before You Begin

You need this equipment:

•Two Windows desktop computers (each computer will be connected to a VPN router)

•Two VPN routers (4-Port Gigabit Security Router with VPN, model number RVS4000, and 10/100 8-Port VPN Router, model number RV082) that are both connected to the Internet

Any VPN router can be deployed, such as the 10/100 16-, 8-, or 4-Port VPN Router (model numbers RV016, RV082, or RV042); however, this example uses the RV082.

Cisco RVS4000 Security Router with VPN Administrator Guide 166