Cisco Systems RVS4000RF manual Setup Time, Enable option

Setting Up and Configuring the Router	5
Setup

Click Save to save your changes, or click Cancel to undo your changes.

Setup > Time

Setup > Time

Set the local time Manually If you wish to enter the time and date manually, select this option, then select the Date from the drop-down fields and enter the hour, minutes, and seconds in the Time fields in 24-hour format. For example, for 10:00 pm, enter 22 in the hours field, 0 in the minutes field, and 0 in the seconds field.

Set the local time using Network Time Protocol (NTP) Automatically If you wish to use a Network Time Protocol server to set the time and date, select this option, and then complete these fields:

Time Zone Select the time zone for your location and your time setting is synchronized over the Internet.

Auto Daylight Saving If your location observes daylight savings time, select the

Enable option.

User-defined NTP Server To specify a user-defined NTP server, select the Enable option, then enter the NTP Server’s IP address in the NTP Server IP field.

NTP Server IP If the User-defined NTP Server option is set to Enable, enter the IP address of the NTP server.

Click Save to save your changes, or click Cancel to undo your changes.

Cisco RVS4000 Security Router with VPN Administrator Guide 44