Setting Up and Configuring the Router

5

 

Setup

 

 

 

 

 

Connect on Demand: Max Idle Time You can configure the router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time), and then automatically re-establish the connection as soon as you attempt to access the Internet again. To activate Connect on Demand, select the Connect on Demand option and enter in the Max Idle Time field the number of minutes of inactivity that must elapse before your Internet connection is terminated automatically.

Keep Alive: Redial period If you select this option, the router periodically checks your Internet connection. If you are disconnected, then the router automatically re- establishes your connection. To use this option, click the radio button next to Keep Alive. In the Redial Period field, specify how often you want the router to check the Internet connection. The default Redial Period is 30 seconds.

Click Save to save your changes, or click Cancel to undo your changes.

Heart Beat Signal

Heart Beat Signal is a service used in Australia. Check with your ISP for the necessary setup information.

Heart Beat Signal

User Name and Password Enter the User Name and Password provided by your ISP.

Heart Beat Server Enter the IP address of the Heart Beat server.

Cisco RVS4000 Security Router with VPN Administrator Guide

33

Page 33
Image 33
Cisco Systems RVS4000RF manual Heart Beat Signal