Cisco Systems RVS4000RF manual Setting Up and Configuring the Router

Setting Up and Configuring the Router	5
Firewall

Source Interface Select the source interface, WAN, LAN, or ANY, from the drop- down menu.

Source IP To apply the rule to one source IP address, select Single from the drop- down menu, then enter the address in the field. To apply the rule to all source IP addresses, select ANY from the drop-down menu. To apply the rule to a range of IP addresses, select Range and enter the starting and ending IP addresses. To apply the rule to a subnet, select Net and enter the IP address and subnet mask.

Destination IP To apply the rule to one destination IP address, select Single from the drop-down menu, then enter the address in the field. To apply the rule to all destination IP addresses, select ANY from the drop-down menu. To apply the rule to a range of IP addresses, select Range and enter the starting and ending IP addresses. To apply the rule to a subnet, select Net and enter the IP address and subnet mask.

Days To make the rule apply on a daily basis, select Everyday. To make the rule apply on specific days of the week only, select the desired days.

Time To make the rule apply for an entire day, select 24 Hours. To make the rule apply only during a specific period of the day, enter the starting time in the From field and the ending time in the To field.

Click Save to save your changes, or click Cancel to undo your changes. Click

Return to return to the IP-Based ACL window.

Cisco RVS4000 Security Router with VPN Administrator Guide 50