Cisco Systems RVS4000RF manual Setting Up and Configuring the Router

5

Setting Up and Configuring the Router

This chapter explains how to configure these router functions:

•Setup, page 26

•Firewall, page 46

•VPN, page 58

•QoS, page 67

•Administration, page 72

•IPS, page 82

•L2 Switch, page 86

•Status, page 95

Configure the router by using the built-in web-based configuration utility. To access the configuration utility of the router, open your web browser and enter http://192.168.1.1 into the Address field. Press the Enter key and the Login window appears.

NOTE The default IP address is 192.168.1.1. If the IP address has been changed via DHCP or the console interface, enter the assigned IP address instead of the default.

The first time you open the configuration utility, enter admin (the default username) in the Username field and enter admin in the Password field. Click the OK button. You can change the password later from the Administration > Management window.

Cisco RVS4000 Security Router with VPN Administrator Guide 25