Setting Up and Configuring the Router

5

 

L2 Switch

 

 

 

 

 

L2 Switch > RADIUS

L2 Switch > RADIUS

Mode Select Enabled or Disabled from the drop-down menu to enable or disable

RADIUS.

RADIUS IP Enter the Server IP address.

RADIUS UDP Port Enter the UDP port. The UDP port is used to verify the RADIUS server authentication.

RADIUS Secret Enter the Key string for authenticating and encrypting all RADIUS communications between the device and the RADIUS server. This key must match the RADIUS server encryption key. If no host-specific value is specified, the global value applies to each host.

Administration State Specifies the port authorization state. The possible field values are:

Auto The controlled port state is set by the Authentication method.

Force Authorized The controlled port state is set to Force-Authorized (forward traffic).

Force Unauthorized The controlled port state is set to Force-Unauthorized (discard traffic).

Port State Displays the state of the selected port.

Cisco RVS4000 Security Router with VPN Administrator Guide

90

Page 90
Image 90
Cisco Systems RVS4000RF manual L2 Switch Radius