Philips HK-0948-MCi500H-FR Prepare, Position Wireless Micro Hi-FiSystem, Connect to AC power

3 Prepare

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•• Risk of decreased battery life! Never mix different brands or types of batteries.

•• Risk of product damage! When the remote control is not used for long periods, remove the batteries.

AOpen the battery compartment.

BInsert 2 AAA batteries with correct polarity (+/-) as indicated.

CClose the battery compartment.

Position Wireless Micro Hi-Fi System

Caution

•• Risk of product damage! Place Wireless Micro Hi-Fi System on a surface that is level, flat, and strong enough to support the product.

Connect to AC power

Warning

•• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the type plate (at the back or at the underside of Wireless Micro Hi-Fi System).

1 Connect Wireless Micro Hi-Fi System to the power supply.

»» Wireless Micro Hi-Fi System turns on and is ready to be set up for use.

Turn on / switch to standby

You can select from the following status options:

•On

•Standby

•Active standby. The button on the remote control can turn on Wireless Micro Hi-Fi System.

•Eco standby

•Passive standby. Only the button on the top panel can turn on Wireless Micro Hi-Fi System.

Note

•• If no buttons are pressed for 20 minutes, Wireless Micro Hi-Fi System switches to standby.

8EN