4Connect to a home network

Before you connect Wireless Micro Hi-Fi System to a router:

•Ensure that the PC meets the minimum requirements.

You can choose one of these modes of connection:

•Wireless connection with automatic IP address

•Wireless connection with static IP address

•Wired connection with automatic IP address

•Wired connection with static IP address

Create wireless connection with automatic IP address

This is how to navigate and select with the remote control:

•Press or to select a menu option.

•Press to confirm a selection.

•Press to go back to the previous screen.

•Press HOME to go to the Home menu. The alphanumeric buttons of the remote control are multi-function buttons:

•To select a number or an alphanumeric character, press a button once or more until you see the number or alphabetic character in the display of Wireless Micro Hi-Fi System.

•To cycle through the alphanumeric characters that are available, press a button repeatedly.

•To delete the last character entry from the display, press CLEAR.

This chapter shows you how to create a wireless connection to a home network with automatic IP address.

1 Ensure that your network name and network password or encryption key are available.

• Some Internet service providers (ISP) require the use of a proxy server.

2 Turn on your wireless access point or wireless router with broadband Internet.

3 Turn on Wireless Micro Hi-Fi System.

4 On Wireless Micro Hi-Fi System, press MENU.

5 Select [Settings] > [Network] >

[Wireless] and confirm.

6 Select the network from the list in the display.

• Enter encryption key with the remote control, then press OK / to continue (if required).

7 Select [Automatic] > (Apply settings?) [Yes] and confirm.

»» Wireless Micro Hi-Fi System displays a confirmation screen that the settings are saved.

Create wireless connection with static IP address