Answering an Intercom Page
When the intercom page tone sounds, the display will show the ID of the handset that is paging.
) Press [ /Flash] or [Clear/Int’com]. If AutoTalk is on, the handset will automatically answer the page when you pick up the handset from the cradle.
2) To hang up an intercom page, press [
].
Muting the Ringer (One call only)
While the phone is ringing, press [
] on the handset or [
] on the base to mute the ringer for this call. The phone will ring again on the next call.
Muting the Microphone
Mute turns off the microphone so the caller can’t hear you. This only works while you are on a call. ) Press [
/Mute]. MUTE ON and 
appear in the display; 
remains while muting is on.
2) To cancel muting, press [
/Mute] again. MUTE OFF appears.
Seven-Digit Dialing
In some areas, the telephone company may allow you to place a local call by dialing only seven digits (instead of ten). If this is the case in your area, you can program your local area code in your phone. Programming your area code will allow you to see the caller’s
To program your local area code:
) Press [Menu/Select]. Select the GLOBAL SETUP menu, and then the AREA CODE submenu.
2)Use the number keypad ([0] through [9]) to enter a
3)Press [Menu/Select]. You will hear a confirmation tone.
Note: If you have multiple bases, select the base before programming the area code (see page 21).
36