Uniden DECT1905 manual Installation and Set-up, Choose a suitable site for the charger pod. See

Page 4

Installation and Set-up

1Choose a suitable site for the charger pod. See page 3.

Plug the mains adapter into a 240 V AC, 50 Hz mains socket, with the switch on the socket set to OFF

See the note on page 3

2 Switch on at the mains socket

3 Fit the rechargeable batteries in each handset

A. Fit the two batteries as shown, making sure you match the + and

–ends to the markings in the

battery compartment

B. Fit the battery compartment cover, sliding it into place and pressing firmly to make sure it is secure

Battery safety

DON’T use non-rechargeable batteries in the handset — they may burst, causing damage. Use the rechargeable batteries supplied.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents DECT1905 Charger pod with separate mains power lead and adaptor Keep your sales till receipt, which is your guaranteeImportant note emergency calls If you need help …Read these notes first Installation and Set-up Choose a suitable site for the charger pod. SeeInstallation and set-up Safety Before you startElectrical Move to a different position to clear the interferenceHandset registration To register To an extraBase unit Without a tick To de-register Press the right Soft button Menu, thenWith which it can best set up a radio link To select aBase unit manually You don’t need this function if you haveHandset registration Warranty
Top Page Image Contents