Uniden DECT1905 manual To register, To an extra, Base unit Without a tick To de-register

Handset registration

7 Press the right Soft button [OK]

uThe display may flash Register for a few moments, while the handset searches for a base unit. It then shows a list of handset numbers for the base unit.

8Key in a free handset number (optional) and press the right Soft button [OK]

(If you don’t key in a number, the base will select one automatically.)

uIf registration is successful, the display returns to standby mode.

To register ◗	Follow the steps as for re-registering, but at step 5,
to an extra	move the highlight to a free base unit number (one
base unit	without a tick)
To de-register		You may need to do this in order to replace a
a handset		faulty handset. Using any registered handset:
1		Press the right Soft button [Menu], then
		press the ￿ or ￿ button to scroll to Base
2		Press the right Soft button [OK], then press
		the ￿ or ￿ button to scroll to De-register
3		Press the right Soft button [OK]

uThe display shows Base-PIN:

4Key in the base unit’s PIN code (default 0000) and press the right Soft button [OK]

u The display shows a list of the handsets registered to the base unit.

5Key in a handset number

u The display shows De-registerfor a few moments. When the handset has been de- registered, the display goes back to standby mode.

8