Uniden DXI4560 Series, DXI4561 Series manual Call was answered before the second ring

Page 39

	Symptom	Suggestion
		• The call was answered before the second ring.
	The Caller ID does not	• The call was placed through a switchboard.
	The Caller ID does not	• Charge the handset.
	display.	• Charge the handset.
	display.	• Your Caller ID service may not be active; contact your local telephone service

		provider.
	A handset is not working.	• Make sure the battery pack is connected to the handset and fully charged.
	A handset is not working.	• Re-register the non-functional handset.
		• Re-register the non-functional handset.
	Unavailable message is	• Make sure the other handset is not already in use. Both handsets cannot be in
	Unavailable message is	talk at the same time.
	displayed on the LCD screen	talk at the same time.
	displayed on the LCD screen	• Place the handset in the base for at least 5 seconds to re-register to the base.
	of the handset.
	of the handset.	• Make sure the handset is not too far from the base when trying to use.

	The handset doesn’t
	communicate with the base or	• Re-register both handsets (see page 13).
	the other handset.
	No 3- way conversation.	• Only one handset at a time can talk with an outside caller. To allow the other
	No 3- way conversation.	handset to talk to the caller, transfer the call.
		handset to talk to the caller, transfer the call.
	Voice Message Indication	• Contact your local telephone company to make sure that your telephone receives
	Voice Message Indication	FSK message signaling.
	does not work.	FSK message signaling.
	does not work.	• Reset the indicator by pressing and holding [find] for 5 seconds.

38

Image 39

Contents Page Contents Welcome AccessibilityManual Conventions TerminologyProduct Overview Main Phone FeaturesHandsets Controls and FunctionsTEL Line jack Main Base UnitExtra Charging Cradle Find keyChoosing the Best Location Installing the PhoneInstalling the Rechargeable Battery Packs into the Handsets Installing the Base Unit and Charging Cradle Modular Standard wall plate mounting Mounting the Base Unit on a WallDirect wall mounting Register Handsets to the Main Base before Using When to Re-register Handsets Activating AutoTalk Basic SetupProgramming Your Area Code Activating Caller ID on Call Waiting HS1 onlyChoosing the Dialing Mode HS1 only Setting the Language Storing a Name and Number in Memory Using the Speed Dial MemoryNumber of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Using Your Phone Making and Receiving CallsMaking a Call from Speed Dial Memory Making a Call from the Caller ID List To cancel speed dialingTransferring a Call To transfer a callTo receive a transfer call Temporarily Mute Ringer Selecting the Ring Tone and VolumeAdjusting the Earpiece Volume Redialing the Last Dialed NumberUsing Call Waiting Selecting a Different ChannelFind Handset Tone Dialing Switch-over Voice Mail Waiting IndicatorTo access your voice mailbox Caller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID Message List Caller ID on Call Waiting CidcwPress delete/transfer Deleting Information from the Caller ID ListDeleting a Caller ID message Deleting all Caller ID names/numbersChanging the Digital Security Code Maintenance SpecificationsPower Failure Talk and Standby Times Low battery alertCleaning the battery charging contacts Battery replacement and handlingTraveling Out-of-Range TroubleshootingCommon Issues Symptom SuggestionRe-register both handsets see Call was answered before the second ring Handset Base Liquid DamageRechargeable Nickel-Cadmium Battery Warning PrecautionsFCC Wants You To Know Important Safety InstructionsShown on the label Radio InterferenceCordless Telephone Privacy Terminal EquipmentRadio Equipment One Year Limited Warranty O, P, Q IndexG, H K, LAt Uniden, we’ll take care of you