Uniden DXI4560 Series, DXI4561 Series Installing the Rechargeable Battery Packs into the Handsets

Page 9

Installing the Rechargeable Battery Packs into the Handsets

Each handset is powered by a rechargeable battery pack. Once installed, the battery charges automatically when the handset is placed in the base or charging cradle.

To install the rechargeable battery pack:

1)Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.

2)Plug the battery pack connector (red & black wires) into the small jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one-way.) Match the wire colors to the polarity label in the battery compartment, connect the battery, and listen for a click to insure connection.

3)Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place.

4)Place the battery case cover back in the handset by sliding it upwards until it clicks into place.

Note: Use only the Uniden (BT-1006) rechargeable battery pack supplied with your phone.

Image 9

Contents Page Contents Welcome AccessibilityManual Conventions TerminologyProduct Overview Main Phone FeaturesHandsets Controls and FunctionsExtra Charging Cradle Main Base UnitFind key TEL Line jackChoosing the Best Location Installing the PhoneInstalling the Rechargeable Battery Packs into the Handsets Installing the Base Unit and Charging Cradle Modular Standard wall plate mounting Mounting the Base Unit on a WallDirect wall mounting Register Handsets to the Main Base before Using When to Re-register Handsets Activating AutoTalk Basic SetupProgramming Your Area Code Activating Caller ID on Call Waiting HS1 onlyChoosing the Dialing Mode HS1 only Setting the Language Storing a Name and Number in Memory Using the Speed Dial MemoryNumber of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Using Your Phone Making and Receiving CallsMaking a Call from Speed Dial Memory Making a Call from the Caller ID List To cancel speed dialingTransferring a Call To transfer a callTo receive a transfer call Adjusting the Earpiece Volume Selecting the Ring Tone and VolumeRedialing the Last Dialed Number Temporarily Mute RingerUsing Call Waiting Selecting a Different ChannelFind Handset Tone Dialing Switch-over Voice Mail Waiting IndicatorTo access your voice mailbox Caller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID Message List Caller ID on Call Waiting CidcwDeleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Press delete/transferChanging the Digital Security Code Maintenance SpecificationsPower Failure Talk and Standby Times Low battery alertCleaning the battery charging contacts Battery replacement and handlingCommon Issues TroubleshootingSymptom Suggestion Traveling Out-of-RangeRe-register both handsets see Call was answered before the second ring Handset Base Liquid DamageRechargeable Nickel-Cadmium Battery Warning PrecautionsFCC Wants You To Know Important Safety InstructionsShown on the label Radio InterferenceCordless Telephone Privacy Terminal EquipmentRadio Equipment One Year Limited Warranty G, H IndexK, L O, P, QAt Uniden, we’ll take care of you