2)Enter the number ( [0] – [9] ), or press [vol/
/
] or [vol/
/
] to select the speed dial number you would like to dial.
3)Press [talk/flash]. CONNECTING changes to TALK, and the volume setting and the
number selected appear on the display. Then the displayed number is dialed.
Note: You can also press [talk/flash] before you access the speed dial memory.
When you come to the phone number you want to dial, press [select/channel].
To cancel speed dialing
Press [end] to return to standby. If accessing the list during an active call, you can press [memory] to exit the list immediately. If no key is pressed for 30 seconds, the handset will exit the speed dial list automatically.
Note: Pressing [end] to exit the speed dial list during a call will disconnect the call immediately.
Making a Call from the Caller ID List
You can place a call directly from the Caller ID list.
1) Press [cid/menu] in standby. Use [vol/
/
] or [vol/
/
] to select the phone number that you want to dial.
2) To have the phone dial a "1" before the displayed Caller ID number, press [1]. To have the phone dial the stored area code before the displayed Caller ID number, press [3].
3)Press [talk/flash]. The displayed phone number dials automatically.
Note:
•You can also press [talk/flash] before you access the Caller ID list. When you come to the phone number you want to dial, press [select/channel].
•You cannot make a call from the Caller ID list if your cordless telephone is connected to a private branch exchange (PBX).
24