34
GB

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1Switch on the television.
2To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:The DVD-VCR is switched on automatically.
4Select:
The station to be recorded using the
PROG( or )
buttons
or
The LINE1, LINE2 source using the INPUT SEL. button for a
satellite tuner or external video source
Result:The channel number is displayed and the programme
can be seen on the television.
5Select the recording speed by pressing the SPEED button as
many times as required (see page 32).
6Hold the REC button (
) down for a while to start recording.
Result:The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 42).
7Press the REC button (
) several times to increase the
recording time in:
30-minute intervals up to four hours
1-hour intervals up to nine hours
Result:The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically and power off.
8If you wish to cancel the recording before the end, press
STANDBY/ON.
If the end of the tape is reached while recording:
The recording stops and power off.
This function is not available in DVD recording
EJECT
STANDBY/ON
DVD
PROG
VCR
LINE2
3
OK
6
4
4
5
LENGTH 2:30
SET LENGTH :
PRESS REC
VCR
00169N DVD-V70/XSA-GB2 11/14/05 10:11 AM Page 34