Searching for a Specific Sequence
42
GB
VCR
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
➢This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the samesystem and vice versa.
Go To 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1After pressing the SEARCH, press the corresponding
or
buttons, until the Go To (0:00:00)option is selected.
2Press the OK or
.
End Search
Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1After pressing the SEARCH, press the corresponding
or
buttons, until the End Search option is selected.
2Press the OK or
.
21 12
➞
etc.
Prev
Seq.
Seq. being
played
Next
Seq. etc.
OK
1
00169N DVD-V70/XSA-GB2 11/14/05 10:11 AM Page 42