Uniden XCA650 important safety instructions Important Safety Instructions

Page 3

Important Safety Instructions

When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons:

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the product.

3.Unplug this product from the wall outlet before cleaning, and use a dry cloth, without liquid or aerosol cleaners.

4.Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.

5.Do not place this product on an unstable cart, stand, or table. The telephone may fall, causing serious damage to the unit.

6.Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect the product from overheating, these openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.

7.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.

8.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be damaged by persons walking on it.

9.Do not overload wall outlets and extension cords, as this can result in the risk of fire or electrical shock.

10.Never push objects of any kind into this product through cabinet slots, as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

11.To reduce the risk of electric shock, do not disassemble this product. Take it to qualified service personnel when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks.

Incorrect reassembly can cause electric shock when the appliance is subsequently used.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Contents Page Important Safety Instructions Battery Safety Precautions Introduction FeaturesIncluded with the XCA650 Telephone Line Problems Important Electrical ConsiderationsRange More Than One Cordless Telephone Radio InterferenceInstallation Selecting a LocationTelephone Line Outlets Applying Power to the Base Unit Connecting the Telephone CordsDesk or Tabletop Installation Adapter Safety FeatureRing VOL PULSE-TONE DC OFF-LO-HI Use only the Uniden AC Adapter supplied with this phone Wall Installation Standard Wall Plate Mounting Plug the AC Adapter into the Base Unit Direct Wall Mounting Ring VOL PULSE-TONE DC OFF-LO-HI Place the AC Adapter cord inside the molded channel Setting the Handset Retainer Put the retainer back into its slot on the Base Unit Setting Up Your Phone Installing the Handset Battery PackExtending the Antenna Page Cleaning the Battery Contacts Charging the Battery Pack Initial Battery Charging Battery Memory Effect Low Battery IndicatorSetting the Pulse/Tone Switch Base Volume Controls Adjusting Ringer/Volume Controls Handset Ringer ControlAutomatic Digital Code Security Page Page Making and Receiving Calls Using Your PhoneChannels Changing Channels, Flash, and Page/FindStoring a Number in Memory Programming Your PhoneService, press P Storing a Mixed Number 3300 Dialing a Stored Number Erasing a Stored Number Chain DialingTone indicates the number is Erased Integrated Answering System Turning the Answering System On/Off Handset Operation Answering System SetupTo turn the Answering System Off, press R Base Operation Setting the Clock30320# Reviewing Time and Day Stamp Handset Operation Preset Messages Setting Your Outgoing Message OGMRecording Your Personal OGM Handset Operation Message replays in the Handset receiver Base Operation Selecting a Preset OGM Setting the Toll Saver Switch VOX/Calling Party Control FeatureUsing the Reset Button Playing New Messages Handset Operation Using Your Answering SystemTalk/batt low LED goes off Playing a Stored Message Handset Operation First message stored begins playing Repeating a Message Handset Operation To return to Standby, press R Base Operation Skipping a Message Handset Operation To return to Standby Press R Deleting a Message Handset Operation If you decide to delete a Message, press 4during the message Deleting All Messages You will hear three short tones, followed by a longer tone Voice-Guided Help Menu Message Full IndicationWhen you return to Standby, the talk/batt low LED goes off Screening Incoming Calls Leaving a Memo Message To record a conversation during a call Recording a Telephone ConversationRemote Operation Setting Your PIN CodePress R again to return Using a Touch-Tone Phone Your Answering System automatically returns to Standby Telephone Troubleshooting Chart TroubleshootingAll of the saved messages Answering System Troubleshooting ChartPage XCA650/655 Precautions Answering Device Remote Keys Handset Controls and Keys Base Unit Controls and Keys One Year Limited Warranty

XCA650 specifications

The Uniden XCA650 is a highly advanced radar detector that stands out in the competitive market of vehicle safety devices. Designed for optimal performance, this device combines state-of-the-art technologies with user-friendly features, making it an indispensable companion for drivers looking to enhance their road safety while navigating potential speed traps.

One of the primary features of the Uniden XCA650 is its exceptional range and sensitivity. The device utilizes advanced digital signal processing technology that allows it to detect radar signals from a significant distance. This means drivers have ample time to adjust their speed when approaching speed enforcement zones. The XCA650 is equipped with multiple radar band detection capabilities, including X, K, and Ka bands, which are commonly used by law enforcement. This versatility ensures that the detector is prepared for various enforcement tactics.

Another remarkable characteristic of the Uniden XCA650 is its dual-lens laser detection system. This system enhances detection accuracy by identifying and differentiating between legitimate radar signals and false alerts. By filtering out interference from sources such as automatic doors and other non-threatening technological devices, the XCA650 helps drivers stay focused and aware of genuine threats on the road.

The device features a user-friendly interface with a clear display that provides real-time alerts and notifications. The LCD screen is bright and easily readable, even in direct sunlight. Users can customize various settings to suit their preferences, including the volume of alerts and the sensitivity levels of the radar detection. Additionally, the XCA650 includes a built-in GPS feature that not only helps in reducing false alerts but also enables users to receive alerts on known speed camera locations and red light cameras.

Another standout feature is the K and Ka filtering technology. This technology allows users to program the detector to ignore specific frequency ranges that may frequently produce false alerts, ensuring a smoother driving experience without compromising safety.

In terms of durability, the Uniden XCA650 is designed to withstand the rigors of daily use. Its compact and sleek design allows for easy installation without occupying extensive space, while its quality construction ensures longevity.

Overall, the Uniden XCA650 radar detector is a highly effective solution for drivers seeking to improve their awareness of speed enforcement while reducing the hassle of false alerts. With its advanced features, robust performance, and user-friendly design, the XCA650 sets a new standard in the realm of vehicle radar detection.
Top Page Image Contents