Uniden XCA650 Installation, Selecting a Location, Telephone Line Outlets

Page 9

Installation

Selecting a Location

Before choosing a location for your new phone, there are some important guidelines you should consider:

∙The location should be close to both a phone jack and continuous power outlet.

Note: A continuous power outlet is an AC outlet which does not have a switch to interrupt its power.

∙Keep the Base Unit and Handset away from sources of electrical noise such as motors or fluorescent lighting.

∙Be sure there is sufficient space to fully extend the Base Unit antenna.

∙The Base Unit can be placed on a desk or tabletop or mounted on a standard AT&T or GTE wall plate.

∙If you decide to mount your phone on the wall, make sure to change the Handset Retainer so that the tab which holds the Handset faces up. (See page 19 for more information.)

∙You should charge your new phone for 15-20 hours before completing the installation or using the Handset.

Telephone Line Outlets

There are two types of phone outlets:

Modular Jack

Most phone equipment available now uses modular jacks. Phone cords are fitted with a molded plastic connector which plugs into this type of jack. If you do not have modular phone jacks, contact your local telephone company for information about their installation.

Hard-wired Jack

Some equipment is wired directly to a phone jack, and these types of installations require a modular jack converter. This type of installation is not difficult; however, you should contact your Uniden telephone dealer or a telephone supply store for advice about the proper adapter or converter for your particular situation.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Contents Page Important Safety Instructions Battery Safety Precautions Introduction FeaturesIncluded with the XCA650 Telephone Line Problems Important Electrical ConsiderationsRange More Than One Cordless Telephone Radio InterferenceInstallation Selecting a LocationTelephone Line Outlets Applying Power to the Base Unit Connecting the Telephone CordsDesk or Tabletop Installation Adapter Safety FeatureRing VOL PULSE-TONE DC OFF-LO-HI Use only the Uniden AC Adapter supplied with this phone Wall Installation Standard Wall Plate Mounting Plug the AC Adapter into the Base Unit Direct Wall Mounting Ring VOL PULSE-TONE DC OFF-LO-HI Place the AC Adapter cord inside the molded channel Setting the Handset Retainer Put the retainer back into its slot on the Base Unit Setting Up Your Phone Installing the Handset Battery PackExtending the Antenna Page Cleaning the Battery Contacts Charging the Battery Pack Initial Battery Charging Battery Memory Effect Low Battery IndicatorSetting the Pulse/Tone Switch Base Volume Controls Adjusting Ringer/Volume Controls Handset Ringer ControlAutomatic Digital Code Security Page Page Making and Receiving Calls Using Your PhoneChannels Changing Channels, Flash, and Page/FindStoring a Number in Memory Programming Your PhoneService, press P Storing a Mixed Number 3300 Dialing a Stored Number Erasing a Stored Number Chain DialingTone indicates the number is Erased Integrated Answering System Turning the Answering System On/Off Handset Operation Answering System SetupTo turn the Answering System Off, press R Base Operation Setting the Clock30320# Reviewing Time and Day Stamp Handset Operation Preset Messages Setting Your Outgoing Message OGMRecording Your Personal OGM Handset Operation Message replays in the Handset receiver Base Operation Selecting a Preset OGM Setting the Toll Saver Switch VOX/Calling Party Control FeatureUsing the Reset Button Playing New Messages Handset Operation Using Your Answering SystemTalk/batt low LED goes off Playing a Stored Message Handset Operation First message stored begins playing Repeating a Message Handset Operation To return to Standby, press R Base Operation Skipping a Message Handset Operation To return to Standby Press R Deleting a Message Handset Operation If you decide to delete a Message, press 4during the message Deleting All Messages You will hear three short tones, followed by a longer tone Voice-Guided Help Menu Message Full IndicationWhen you return to Standby, the talk/batt low LED goes off Screening Incoming Calls Leaving a Memo Message To record a conversation during a call Recording a Telephone ConversationRemote Operation Setting Your PIN CodePress R again to return Using a Touch-Tone Phone Your Answering System automatically returns to Standby Telephone Troubleshooting Chart TroubleshootingAll of the saved messages Answering System Troubleshooting ChartPage XCA650/655 Precautions Answering Device Remote Keys Handset Controls and Keys Base Unit Controls and Keys One Year Limited Warranty

XCA650 specifications

The Uniden XCA650 is a highly advanced radar detector that stands out in the competitive market of vehicle safety devices. Designed for optimal performance, this device combines state-of-the-art technologies with user-friendly features, making it an indispensable companion for drivers looking to enhance their road safety while navigating potential speed traps.

One of the primary features of the Uniden XCA650 is its exceptional range and sensitivity. The device utilizes advanced digital signal processing technology that allows it to detect radar signals from a significant distance. This means drivers have ample time to adjust their speed when approaching speed enforcement zones. The XCA650 is equipped with multiple radar band detection capabilities, including X, K, and Ka bands, which are commonly used by law enforcement. This versatility ensures that the detector is prepared for various enforcement tactics.

Another remarkable characteristic of the Uniden XCA650 is its dual-lens laser detection system. This system enhances detection accuracy by identifying and differentiating between legitimate radar signals and false alerts. By filtering out interference from sources such as automatic doors and other non-threatening technological devices, the XCA650 helps drivers stay focused and aware of genuine threats on the road.

The device features a user-friendly interface with a clear display that provides real-time alerts and notifications. The LCD screen is bright and easily readable, even in direct sunlight. Users can customize various settings to suit their preferences, including the volume of alerts and the sensitivity levels of the radar detection. Additionally, the XCA650 includes a built-in GPS feature that not only helps in reducing false alerts but also enables users to receive alerts on known speed camera locations and red light cameras.

Another standout feature is the K and Ka filtering technology. This technology allows users to program the detector to ignore specific frequency ranges that may frequently produce false alerts, ensuring a smoother driving experience without compromising safety.

In terms of durability, the Uniden XCA650 is designed to withstand the rigors of daily use. Its compact and sleek design allows for easy installation without occupying extensive space, while its quality construction ensures longevity.

Overall, the Uniden XCA650 radar detector is a highly effective solution for drivers seeking to improve their awareness of speed enforcement while reducing the hassle of false alerts. With its advanced features, robust performance, and user-friendly design, the XCA650 sets a new standard in the realm of vehicle radar detection.
Top Page Image Contents