5)Connect the telephone line cord to the TEL LINE jack and a telephone outlet once the handset is fully charged.
If your telephone outlet isn't |
|
modular, contact your telephone |
|
company for assistance. | Modular |
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1)Plug the the AC adapter to the DC IN 9V jack.
2)Wrap the AC adapter cord inside the molded wiring channel as shown.
3)Plug the AC adapter into a standard 120V AC wall outlet.
4)Plug the telephone line cord into the TEL LINE jack. Wrap the cord inside the molded wiring channel
as shown.
5)Plug the telephone line cord into the telephone outlet.
6)Raise the antenna to a vertical position.
7)Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.
GETTING STARTED
DO NOT use an AC outlet controlled by a wall switch.
G E T T I N G S TA R T E D [ 13 ]