Uniden EXI2246 manual Terminology, Direct wall mounting

Page 15

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.

1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for mounting the phone.

2) Refer to steps 1 through 6 on page 12 to mount the telephone.

Terminology

Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation.

•Standby Mode - The handset is not in use, off the base, and talk/flash has not been pressed. A dial tone is not present.

•Talk Mode - The handset is off the base and talk/flash has been pressed enabling a dial tone.

G E T T I N G S T A R T E D [ 13 ]

GETTING STARTED

Image 15

Contents

Page Page Contents Welcome Features Quick Reference Guide Controls and Functions Status LED 9 to Read this FirstChecking the Package Contents Setting up the Phone Choose the best locationDo the following steps Use only the Uniden battery BT-905 supplied with your Battery use time per charge Low Battery AlertCleaning the Battery Charging Contacts Connect the base unit Standard wall plate mounting Mounting the Base Unit on a WallDirect wall mounting TerminologyCaller ID options Setting Menu OptionsChoosing the dialing mode Setting the language Handset On Base Handset Off Base Making and Receiving CallsRinger Mute Adjusting the Handset Ringer and Earpiece VolumeHandset ringer tone and volume Earpiece volumeTone Dialing Switch-over RedialTraveling Out-of-Range Hints Selecting a Different ChannelFlash and Call Waiting Memory Dialing Storing Phone Numbers and NamesE M O R Y D I a L I N G Steps for Entering Names and Special Characters If you make a mistake while entering a nameNumber of times key is pressed E M O R Y D I a L I N G Memory dialing from Standby Mode Making Calls with Memory DialingDisplay a Programmed Number Chain Dialing Memory dialing from Talk ModeEditing a Stored Name and/or Phone Number Memory 1 Stored Memory Store Press select or delete/ch Erasing a Stored Name and Phone NumberRocketDial Storing and Editing the RocketDialMaking Calls with the RocketDial C K E T D I a L Deleting the RocketDialWhen the Telephone Rings You must subscribe to Caller ID service to use this featureCaller ID Viewing the Caller ID Message List Standby modeDeleting a Caller ID message When the pointer is at ¨Yes¨When the pointer is at ¨No¨ Deleting Information from the Caller ID ListTone sounds and all stored Caller ID messages are deleted Dial edit Using the Caller ID ListLong Distance calls and Area Code Setting/Cancellation Calling a party from the Caller ID listStoring Caller ID messages in Memory dialing To attach the beltclip Installing the BeltclipHeadset Installation Changing the Digital Security CodeMaintenance Symptom Suggestion TroubleshootingSymptom Suggestion Battery Information General InformationAC Adapter Information Precautions Installation Considerations Terminal Equipment Radio Equipment K, L IndexMemo E M O At Uniden, we´ll take care of you