Uniden EXI2246 manual Maintenance

Page 41

Note on Power Sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year.

Please contact your place of purchase or the Uniden Parts Department for a replacement battery.

Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product.

Power Failure

Caution

During the period that the power is off, you will not be able to make or receive calls with the telephone.

•Use only the specified Uniden battery pack (BT-905).

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a dry cloth or a pencil eraser, if necessary. (See page 10 for the location of charging terminals.)

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products.

Doing so may discolor the surface of the telephone and damage the finish.

A D D I T I O N A L I N F O R M A T I O N

A D D I T I O N A L I N F O R M A T I O N [ 39 ]

Image 41

Contents Page Page Contents Welcome Features Quick Reference Guide Controls and Functions Status LED 9 to Read this FirstChecking the Package Contents Do the following steps Setting up the PhoneChoose the best location Use only the Uniden battery BT-905 supplied with your Cleaning the Battery Charging Contacts Battery use time per chargeLow Battery Alert Connect the base unit Standard wall plate mounting Mounting the Base Unit on a WallDirect wall mounting TerminologyCaller ID options Setting Menu OptionsChoosing the dialing mode Setting the language Handset On Base Handset Off Base Making and Receiving CallsHandset ringer tone and volume Adjusting the Handset Ringer and Earpiece VolumeEarpiece volume Ringer MuteTraveling Out-of-Range Tone Dialing Switch-overRedial Flash and Call Waiting HintsSelecting a Different Channel Memory Dialing Storing Phone Numbers and NamesE M O R Y D I a L I N G Number of times key is pressed Steps for Entering Names and Special CharactersIf you make a mistake while entering a name E M O R Y D I a L I N G Display a Programmed Number Memory dialing from Standby ModeMaking Calls with Memory Dialing Chain Dialing Memory dialing from Talk ModeEditing a Stored Name and/or Phone Number Memory 1 Stored Memory Store Press select or delete/ch Erasing a Stored Name and Phone NumberMaking Calls with the RocketDial RocketDialStoring and Editing the RocketDial C K E T D I a L Deleting the RocketDialCaller ID When the Telephone RingsYou must subscribe to Caller ID service to use this feature Viewing the Caller ID Message List Standby modeWhen the pointer is at ¨No¨ When the pointer is at ¨Yes¨Deleting Information from the Caller ID List Deleting a Caller ID messageTone sounds and all stored Caller ID messages are deleted Long Distance calls and Area Code Setting/Cancellation Using the Caller ID ListCalling a party from the Caller ID list Dial editStoring Caller ID messages in Memory dialing Headset Installation Installing the BeltclipChanging the Digital Security Code To attach the beltclipMaintenance Symptom Suggestion TroubleshootingSymptom Suggestion AC Adapter Information Battery InformationGeneral Information Precautions Installation Considerations Terminal Equipment Radio Equipment K, L IndexMemo E M O At Uniden, we´ll take care of you