correct insertion direction for Bolts
(8).
3.Attach the Scraper Plate (6) through the existing holes in each of the Lower Handles (7) using the Nuts (5) and the Bolts (4).
Figure 1
Drain Plug
Drain
4.Add weight to the Steel Lawn Roller by standing the empty Roller Barrel on it’s side with the Drain Hole up.
Remove the Drain Plug (2), then us- ing a funnel (not supplied) carefully pour water or sand into the opening until full. (Sand would give maximum weight.) See Figure 1.
5.Using two people for added safety, carefully lay the Steel Lawn Roller onto the ground.
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
1.Before operating the Steel Lawn Roller, put on
2.Roll the Steel Lawn Roller to the area to be compacted.
3.Use the Steel Lawn Roller as you would if you were mowing a lawn. Roll one direction until all areas are rolled, then roll the other direction till area is completely rolled again.
4.If it is necessary to wash or clean debris from the Roller Barrel before you are finished using it, be sure to dry the surface with a towel or absor- bent cloth to prevent a quick build up of added debris.
5.When completely finished with your project, wash off the Steel Lawn Roller with a hose and soft rag or brush and let stand until completely dry before storing. Store in garage or shed away from children.
Maintenance And
Servicing
To prevent serious injury from tool failure:
Do not use damaged equipment. If any- thing abnormal is noticed, or occurs while using, have the problem corrected before further use.
Procedures not specifically explained in this manual must be performed only by a qualified technician.
SKU 98383 | For technical questions, please call | Page 4 |
