Step 1 Charging the Battery
TO INSTALL THE HANDSET BATTERY
1 Remove the cover.
Connect the battery pack
2 connector with the correct polarity.
3 Replace the cover.
TO PLUG INTO AC POWER
1Plug AC adapter cord into the base unit and then into a 120V AC outlet.
2Place the handset on the base.
Note: You must charge the battery continuously for 15 - 20 hours before using the phone.
Step 2 Connecting
CONNECT TO A PHONE LINE
When the handset battery pack is fully charged, after
Your phone is set for tone dialing. If your local network requires pulse dialing, please see “Choose the dialing mode” on page 15.
Step 3 Setting Up the Caller ID/Language
Note: Three Caller ID options are available: AutoTalk, Caller ID on Call Waiting (CIDCW), and Area Code.
TO CHANGE CALLER ID OPTIONS
1Press and hold call id/menu.
2Press or to move the pointer to an option.
3Press select to change the option setting.
4Press end and return the handset to the base.
TO CHOOSE THE LANGUAGE
1Press and hold call id/menu.
2Press or to move the pointer to
Language.
3Press select to select Eng (English) or Fr. (French).
4Press end and return the handset to the base.
QUICK REFERENCE GUIDE
Q U I C K R E F E R E N C E G U I D E [ 3 ]