Omron V022-E3-1 Section, SYSTEM MENU Quit Transmit Mode Maintenance Mode, Maintenance Menu

￿￿￿￿￿￿￿￿￿.￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿.￿￿￿ Section 3-3

Selecting the Menu Items Press (touch) a menu item on the screen to select the item.

Menu items allow to make the ON/OFF selection or to call subsequent menu or screen.

Example :

To call the “Maintenance Mode Menu” by pressing the “Maintenance Mode” on the

System Menu screen:

[ SYSTEM MENU ]

Quit

Transmit Mode

Maintenance Mode

[ MAINTENANCE MENU ]
Quit	Display History
PT Setting Status
I/O Check
Memory Init.
Memory Switches

System Menu Items	The System Menu items and the functions are as given below.
	Menu Item	Function
	Quit	The System Menu screen is cleared and the NT600S will return
		to the RUN mode.
	Transmit Mode	The Transmit Mode screen will be displayed to allow the trans-
		mission of the screen data between the NT600S and the support
		tool. For the transmission of the screen data, refer to Section 3-5
		Registering the Screen Data (page 79).
	Maintenance Mode	The Maintenance Mode menu will be displayed to allow the
		maintenance of the NT600S system.

Switching from the System Menu to the RUN mode

The NT600S will exit the System Menu and switch to the RUN mode in the cases mentioned below.

￿Selecting “Quit” in the System Menu.

The screen (touch switches) is not pressed for over 10 seconds.

￿￿