Omron V022-E3-1 Appendix E, Making the Cable for Connection to the PC, Parts Required

.￿￿￿￿￿￿￿￿.￿(￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿$￿0&￿￿￿ Appendix E

APPENDIX E

Method for Making the Cable for Connection to the PC/Host

Explained below is the method for making the cable that connects the NT600S and the PC/Host.

Connect the wires to the connectors in accordance with the connector specification for each unit.

Making the Cable for Connection to the PC

Parts Required

Two connectors, two connector covers and one cable are required to make up a connecting cable. One connector and one connector cover is supplied with most PCs.

Name	Model	Delivered with	Remarks
Connector	XM2A-0901	C series CQM1, C200HS,	9-pin, manufactured by OMRON
		C200HX/HG/HE
		CVM1/CV series CPU unit
		CV500-LK201
	XM2A-2501	C500-LK203	25-pin, manufactured by OMRON
		C500-LK201
		C200H-LK201
	DB-25P	C500-LK201-V1	25-pin, manufactured by JAE
		C120-LK201-V1
Connector	XM2S-0911	C series CQM1, C200HS,	9-pin, manufactured by OMRON
Cover		C200HX/HG/HE
		CVM1/CV series CPU unit
		CV500-LK201
	XM2S-2511	C500-LK203	25-pin, manufactured by OMRON
		C500-LK201
		C200H-LK201
	DB-C2-J9	C500-LK201-V1	25-pin, manufactured by JAE
		C120-LK201-V1

	Note		When connecting the NT600S to an OMRON PLC C￿￿H , the connector and the
			connector hood must be prepared separately since they are not supplied with the
			C￿￿H.
			The connector provided in the CPU unit of the C￿￿H is a 9-pin connector. For the
			connection, the following connector and connector hood should be prepared.
			￿Connector:	XM2A-0901 (9-pin type, OMRON)
			Connector hood: XM2S-0911 (9-pin type, OMRON)
			Prepare the cable recommended by OMRON.
			The recommended cables are indicated in the following table.
Name		Type		Remark
	AWG28￿5P			Multiconductor shielded cable (FUJIKURA, Ltd.)
Cable	IFVV-SB
	CO-MA-VV-SB			Multiconductor shielded cable (HITACHI Cable, Ltd.)
	5P￿28AWG

￿￿￿