Omron V022-E3-1 operation manual Section, SYSTEM MENU Quit

%￿￿￿￿￿￿￿/￿￿￿.￿￿￿￿￿ Section 3-4

Reference Selecting “No” will cancel the memory initialization. To change the system set- tings or to register the screen data, set DIP SW2-1 to OFF and start the

￿NT600S, and then, call the System Menu screen.

The NT600S DIP SW2-1 is used to set “Screen data forced initialize effective/in- effective”. Setting this to ON selects “effective”, and OFF “ineffective”.

Initialization of the Memory Tables

It is possible to initialize the numeral memory tables and character-string memory tables in the NT600S. When these tables are initialized, the values are returned to those set by the support tool.

If a memory table is initialized in the Maintenance Mode, it is initialized regardless of the setting for the resume function (resume function: page 98)

If “Effective” is set for the “Resume Function” memory switch, the initial values set with the support tool will not be reflected in the present values of the memory tables unless the memory tables are initialized.

Reference If “Ineffective” is set for the “Resume Function” memory switch, the memory tables can be initialized just by switching the NT600S power off and back on again, or by resetting it, (page 98)

Using the System Menu, initialize the memory tables by following the procedure given below.

[ SYSTEM MENU ] Quit

Transmit Mode Maintenance Mode

Select “Maintenance Mode”.

	Select “Memory Init.”.
[ MAINTENANCE MENU ]
Quit	Display History
PT Setting Status
I/O Check
Memory Init.
Memory Switches

[ MEMORY INITIALIZATION MENU ] Quit

Screen Data Memory

Memory Tables

Display History

Memory Switches

Select “Memory Tables”.

￿￿