Omron V022-E3-1 4-8Various System Settings, 4-8-1Setting the Key Press Sound, Section

2￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ Section 3-8

4-8 Various System Settings

The NT600S can set a variety of functions to the memory switches which are con- venient during the operation. This section describes the memory switch settings related to the operation environment.

4-8-1 Setting the Key Press Sound

Whether or not the key press sound is given when the NT600S touch switch is pressed can be set with the memory switch.

The factory setting has been set to give the key press sound when the touch key is pressed.

Set the key press sound by the menu operation from the System Menu as men- tioned below.

[ SYSTEM MENU ]

Quit

Transmit Mode

Maintenance Mode

Select “Maintenance Mode”.

	Select “Memory Switches”.
[ MAINTENANCE MENU ]
Quit	Display History
PT Setting Status
I/O Check
Memory Init.
Memory Switches

[ MEMORY SWITCH MENU (1/2) ]

Comm. Method	Host Link	EXIT
Key Press Sound	OFF	NEXT
Buzzer Sound	OFF
		PAGE
Putting-Out Time	None	SAVE
Resume Function	ON
Support Tool Mode	NT600S	EXIT

Each time the “Key Press Sound” touch switch is pressed, the setting option “ON” alter- nates with “OFF”.

￿￿