Omron V022-E3-1 4-9-3Checking the PT Setting Status, Section, Checking the PT setting Status

￿￿￿￿￿￿.￿￿￿￿￿￿￿￿￿￿ Section 3-9

[ I/O CHECK MENU ]	Select “DIP-Switch”.
Quit	Backlight
LED	Communication I/F
Buzzer	DIP-Switch
Touch Switch
LCD Display

[ DIP-SWITCH STATUS ]
1.Forced Memory Init.				OFF
2.Language				English
3.Mode Change				Enable
4.Reserved
5.Reserved
6.Reserved
7.Reserved
8.Battery Low Check				OFF
1	2	3	4	5	6	7	8
EXIT							ON
							OFF

The NT600S DIP switch sta- tuses are displayed.

	￿To exit the DIP switch settings display, press the “EXIT” touch switch.
Note
	If the DIP switch settings have been changed when the NT600S is powered, reset
	the power to the NT600S. The changes with the DIP switches become effective
	only after the power supply is reset.

4-9-3 Checking the PT Setting Status

Checking the PT setting Status

Display the NT600S settings by using the menu operation from the System Menu as mentioned below.

[ SYSTEM MENU ]

Quit

Transmit Mode Maintenance Mode

Select “Maintenance Mode”.

￿￿￿