Omron V022-E3-1 operation manual Appendix E, Applicable CPU

.￿￿￿￿￿￿￿￿.￿(￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿$￿0&￿￿￿ Appendix E

Connecting an NT600S to a C Series C200HS, C200HX/HG/HE, or CPM1, CQM1, CVM1/CV Series (-V￿) CPU Unit￿(Including Communication Port)

C-Series C200HS, C200HX/HG/HE, CPM1, CQM1, CVM1/CV-Series (-EV￿) CPU Unit 9-pin Connector Specifi- cations

Applicable CPU:

C200HS-CPU21-E C200HS-CPU23-E C200HS-CPU31-E C200HS-CPU33-E CPM1-10CDR- CPM1-20CDR- CPM1-30CDR-￿

C200HE-CPU32-E C200HE-CPU42-E

CQM1-CPU21-E CQM1-CPU41-E CQM1-CPU42-E CQM1-CPU43-E CQM1-CPU44-E

C200HG-CPU33-E C200HG-CPU43-E C200HG-CPU53-E C200HG-CPU63-E CV500-CPU01-EV1 CV1000-CPU01-EV1 CV2000-CPU01-EV1 CVM1-CPU01-EV CVM1-CPU11-EV CVM1-CPU21-EV￿

C200HX-CPU34-E C200HX-CPU44-E C200HX-CPU54-E C200HX-CPU64-E

Note The host link function incorporated in CV/CVM1 CPUs (with the exception of -EV￿) cannot be used.

￿Electrical characteristics:		Complies with EIA RS-232C
Signal direction:		Signal input and output is relative to the PC.
1	6
		Connector	Signal Name	Abbreviation	Signal Direction
		Pin No.			Input	Output
		Connector cover	Frame ground	FG	--	--
		2	Send data	SD (TXD)
		3	Receive data	RD (RXD)
		4	Request to send	RS (RTS)		￿
5	9	5	Clear to send	CS (CTS)	￿
		9	Signal ground	SG (GND)	--	--
￿

Wiring Connections

The NT600S does not use pin 4 (RS) or pin 5 (CS). Either short the RS and CS pins of the PC connector together or set the CTS setting selector switch at the rear face of the host link unit to “0V” (see ￿in the figure).

NT600S

	Abbrevi-	Pin
	atioon	number
	FG	1
	SD	2
	RD	3
RS-232C	RS	4
interface	CS	5
	+5V	6
	--	7
	--	8
	SG	9

PC (host link unit)

PinAbbrevi-

number atioon

￿Connector cover FG

2SD

3RD

4	RS	RS-232C
		interface
5	CS
--	--
--	--
--	--

9SG

9-pin connector

Shielding wire

￿￿￿