Omron V022-E3-1 operation manual Setting the RS-232CCommunication Conditions, 4-6-4, Section

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿-￿￿￿￿￿￿$￿0&￿￿￿￿1￿￿￿￿￿￿￿.￿￿￿￿￿￿-￿￿￿￿￿￿				Section 3-6
4-6-4	Setting the RS-232C Communication Conditions
		When connecting the NT600S to the host by the RS-232C method, set the follow-
		ing communication conditions.
		Item	Setting	Factory-Setting
		RS-232C Speed	2400/4800/9600/19200bps	2400bps
			(to be set to the same value as set for the Host)
		Data bit length	7 bits/8 bits	8 bits
		Stop bit length	1 bit/2 bits	1 bit
		Parity bit	Even/odd/none	None
		Flow control	RS/CS control	None
			XON/XOFF control
			None

Select the required menu option from the System Menu by following the procedure given below.

[ SYSTEM MENU ]

Quit

Transmit Mode

Maintenance Mode

Select “Maintenance Mode”.

	Select “Memory Switches”.
[ MAINTENANCE MENU ]
Quit	Display History
PT Setting Status
I/O Check
Memory Init.
Memory Switches

[ MEMORY SWITCH MENU (1/2) ]

Comm. Method	RS-232C	EXIT
Key Press Sound	OFF	NEXT
Buzzer Sound	OFF
		PAGE
Putting-Out Time	None	SAVE
Resume Function	ON
Support Tool Mode	NT600S	EXIT

Press “NEXT PAGE”.

If the RS-232C has been se- lected, the host link speed set- ting does not make any effect.

￿￿