Omron V022-E3-1 Set Inverse Display, End Inverse Display, Set Flashing Display, Section, Format

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ Section 6-4

Specifying the Inverse Display

Use the following command to set the inverse display mode.

Set Inverse Display

Format

[ESC] ”

1B

22

Description	Sets the display attribute to inverse so that all characters and marks sent subse-
	quently are highlighted. Other attributes remain unchanged.

Reference The Set Inverse Display Command is cancelled by the End Inverse Display Command or the Normal Display Command.

The setting with this command remains valid until the screen display is switched or another display attribute setting is made. The default display attributes are

￿set to a normal display when a screen is initially displayed.

Use this command with the Set Flashing Display Command (refer 7-4-2 Set Flashing Display) to produce a flashing inverse display.

Canceling the Inverse Display

Use the following command to cancel the inverse display mode.

End Inverse Display

Format

[ESC] #

1B

23

Description	Clears the inverse display attribute so that all characters and marks sent subse-
	quently are not highlighted. Other attributes remain unchanged.
Reference
	￿The inverse display attribute is set with the Set Inverse Display Command.
	The setting with this command remains valid until the screen display is switched
	or another display attribute setting is made. The default display attributes are
	set to a normal display when a screen is initially displayed.

Specifying the Flash Display

Use the following command to set the flash display mode.

Set Flashing Display

Format

[ESC] $

1B

24

Description	Sets the display attribute to flashing so that all characters and marks sent subse-
	quently are displayed flashing. Other attributes remain unchanged.

￿￿￿