Omron V022-E3-1 operation manual Section, Writing Numerals to the Numeral Memory Table

.￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿3￿￿￿￿￿ Section 5-2

Number of registration words

Set the number of words within 20 words required for registering the character- string data. One word can store two half-size characters or one full-size charac- ter.

Setting the words for the character-string memory tables

The character-string memory tables can be allocated to the following PC words.

Set the word type and the first word.

	Symbol	C Series PCs	Allocated	CVM1/CV Series PCs	Allocated
	DM	Data memory	✓	Data memory	✓
	CH	Internal/Special Relay	✓	Internal/Special Relay	✓
	TIM	Timer		Timer
	CNT	Counter	￿	Counter
	HR	Holding Relay	✓	--
	AR	Auxiliary Relay	✓	Auxiliary Relay	￿
	LR	Link Relay	✓	--
				✓ : OK ￿: NG
Note
	1. Since the special auxiliary relays of the CVM1/CV series PCs are allocated to
	the system, they cannot be used for purposes other than the system use.

2.If the “number of registration words x 2” (“word setting window”) set with the support tool is larger than the “number of character digits” (“character-string display setting” window), the character-string may be broken halfway.

The range of respective area varies with the type of PC. Refer to Appendix L PC

Memory Map (page 291).

Writing Numerals to the Numeral Memory Table

Since numeral memory tables can be allocated to PC words, data can be written from the PC to a numeral memory table, and initial values can be set when creating screen data.

	The numeral display area where the
NT600S
	numeral memory table No. 2 is allocated

Numeral memory table

Defect =

PC

Word

The bar graph display area where the numeral memory table No. 4 is allocated

The contents are the same while they are displayed. Can be updated by the PC.

During the operation, the display contents are automatically updated so that the contents of the numeral memory table being displayed are the same as that of the PC word.

￿￿￿