5-5 Bar Graphs

￿￿￿3￿￿￿￿￿

Section 4-5

5-5 Bar Graphs

The contents of the numeral memory tables of the NT600S can be displayed as bar graphs as well as numeral data.

Setting for bar graphs is made when creating the screen data using the support tool.

The following describes the kinds of bar graphs that can be displayed.

The display data of bar graph can be changed by changing the contents of the nu- meral memory table.

For the procedure for changing the data of the bar graph presently displayed, refer to “Upgrading Bar Graphs (Changing the Contents of Allocated Words)” (page 179) or “Write Numeral Memory Table” (page 209).

5-5-1 Bar Graph Functions

The bar graph function displays a value in a bar graph form as a percentage to the specified value according to the contents of a numeral memory table. Up to 50 bar ￿graphs can be registered in one screen.

Reference table

The numeral memory table used as the reference for the bar graph display can be set.

Reference The support tool has the “direct” and “indirect” options for the reference method of the numeral memory table. However, the NT600S recognizes the “direct” method only.

The bar graph display cannot use hexadecimal numbers. If hexadecimal numbers are set in the reference numeral table, the bar graph cannot be displayed. Use caution not to write hexadecimal numbers except the minus sign “F” to the refer- ence numeral table.

Bar Graph Attributes

The following attributes can be set with the NT600S for the bar graph display:

Reference Use the support tool to make settings for the bar graph display when creating the ￿screen data.

Position and size

The display position and size (length) of a bar graph can be set.

The width of the bar graph can be set in the range of 2 to 255 dots.

￿￿￿

Page 145
Image 145
Omron V022-E3-1 operation manual 5-5Bar Graphs, 5-5-1Bar Graph Functions, Section, Bar Graph Attributes