Omron V022-E3-1 operation manual Section, Exit, Next, Page, Support Tool Mode, Setting the Buzzer

2￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ Section 3-8

Types of the Buzzer Sounds

Reference

The following buzzer sounds can be set.

￿Continuous sound: The buzzer continues to sound.

Intermittent sound: The buzzer sounds intermittently at constant intervals.

If both the continuous buzzer and the intermittent buzzer are instructed by the Host, the continuous buzzer will sound.

Setting the Buzzer	Use the memory switches to set whether or not the buzzer sounds when the buzz-
	er sound has been instructed by the Host or with a screen attribute or when an
	error has occurred.
	The factory setting has been made at “ON” so that the buzzer will sound when a
	command is received from the Host or when a screen attribute setting error has
	occurred.
	Set the buzzer sound by the menu operation from the System Menu as mentioned
	below.

[ SYSTEM MENU ]

Quit

Transmit Mode

Maintenance Mode

Select “Maintenance Mode”.

	Select “Memory Switches”.
[ MAINTENANCE MENU ]
Quit	Display History
PT Setting Status
I/O Check
Memory Init.
Memory Switches

[ MEMORY SWITCH MENU (1/2) ]

Comm. Method	Host Link	EXIT
Key Press Sound	OFF	NEXT
Buzzer Sound	OFF
		PAGE
Putting-Out Time	None	SAVE
Resume Function	ON
Support Tool Mode	NT600S	EXIT

Repeatedly pressing the “Buzz- er Sound” touch switch cycles through the setting options “ON”, “ERR ON”, and “OFF”.

￿￿