Omron V022-E3-1 operation manual Section, C200H Interface Unit Part Names and Functions

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿$￿-￿￿￿￿"￿￿&￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ Section 2-7

C200H Interface Unit Part Names and Functions

This section gives the names and functions of the parts of the C200H interface unit for your information before you mount the C200H interface unit to the NT600S.

C200H interface unit: NT-LB122

Front of C200H interface unit

Switch cover

Covers the rotary and DIP switches used to set the basic operations of the C200H interface unit.

Host interface connector

The cable from the PC is connected here.

Reference When the C200H interface unit is mounted or removed from the NT600S, the memory switches are initialized.

Mounting and Setting the C200H Interface Unit

This section explains how to mount the C200H interface unit on the NT600S, and how to set the DIP switches.

Mounting the Unit to the NT600S

	Mount the C200H interface unit by inserting it fully home so that there is no clear-
	ance between it and the NT600S, then tightening the screws securely.
	If it is difficult to make the connection, shift the position of the unit and try inserting it
	again.
Note
	Be sure to switch off the power to the NT600S before mounting or removing the
	unit.

￿￿