Omron V022-E3-1 operation manual Section, SYSTEM MENU Quit Transmit Mode Maintenance Mode

￿￿￿￿￿￿.￿￿￿￿￿￿￿￿￿￿		Section 3-9
	The “RUN” LED on the front face of the NT600S will flash. The “POWER” LED
	remains￿	lit.
	To quit the LED check, press the “EXIT” touch switch. The I/O Check Menu will
	be redisplayed.
Checking the Buzzer	Check the NT600S buzzer by using the menu operation from the System Menu as
	mentioned below.

Select “Maintenance Mode”.

[ SYSTEM MENU ] Quit

Transmit Mode

Maintenance Mode

	Select “I/O Check”.
[ MAINTENANCE MENU ]
Quit	Display History
PT Setting Status
I/O Check
Memory Init.
Memory Switches
[ I/O CHECK MENU ]	Select “Buzzer”.
Quit	Backlight
LED	Communication I/F
Buzzer	DIP-Switch
Touch Switch
LCD Display

￿If the buzzer function is normal, the continuous buzzer sound will be made. To stop the buzzer, press “EXIT” in the buzzer check screen.

Reference Though memory switch setting for the buzzer has been made for OFF, the buzzer will sound when the buzzer check is executed.

Checking the Touch Switches

Execute a touch switch check by the menu operation from the System Menu as mentioned below.

￿￿￿