CPU-mounted type: C120-LK201-V1

￿￿￿￿￿￿￿￿￿￿￿￿￿$￿￿￿￿￿&￿￿'￿￿(￿

Section 2-4

CPU-mounted type: C120-LK201-V1

[Setting the rear switches]

￿Unit #, parity, and transfer code (DIP SW1-1 to SW1-5) Set SW1-1 to SW1-5 to “OFF” (“0”).

*Parity is fixed at Even Parity. Transfer code is fixed

￿at ASCII 7 data bits and 2 stop bits.

Baud rate (DIP SW2-1 to SW2-4)

Set these switches to “1010” to select 9600 bps.

Set these switches to “0010” to select 19200 bps.

1-to-1/1-to-N selection (DIP SW2-6)

￿Set SW2-6 to “0” (1-to-N).

Instruction level (DIP SW2-7, SW2-8) Set these switches to “1”.

￿(Levels 1, 2, and 3 are enabled.)

CTS selection (DIP SW3-1 and SW3-2)

Set SW3-1 to “ON” (1) and SW3-2 to “OFF” (0). (Set this always to “0V”.)

￿Synchronization (DIP SW3-3 to SW3-6)

Set SW3-3, SW3-5, and SW3-6 to “ON” (1), and SW3-4 to “OFF” (0). (Set these to “Internal”.)

￿￿

Page 52
Image 52
Omron V022-E3-1 operation manual Section, CPU-mountedtype: C120-LK201-V1, Setting the rear switches