Omron V022-E3-1 operation manual 7-5Key to Programs, 7-5-1Use of Programs, Section

5￿￿￿￿$￿￿￿￿￿￿￿ Section 6-5

7-5 Key to Programs

The following programs include all the commands that can be used with the

NT600S.

7-5-1 Use of Programs

The sample program appears as follows on the screen.

Menu bar Sub-menu Parameter input column

Send command column Run confirm column

Receive command display column

Use the program as shown below.

		Execute program
		[ESC]
Interrupt display when	[ESC]	Select type of send
command received		command
		[ESC]
		Select send command
		Input parameter
		Confirm send command
		Execute transfer
		command

End program

Main Menu

Sub-menu

Input parameter column

Send command column, confirm execution

Up, Down, Left, Right keys: select item

Enter key: confirm

[Esc]: stop

Note	1.	This sample program is written in N88BASIC (86) (NEC) for a PC-9801 com-
		puter. Modify this program for use with any other computer language or com-
		puter such as an IBM PC/AT or compatible.
	2.	The interval between parameter input and command transmission is a hold
		interval for interrupt processing of the received command. If an interrupt is
		permitted between the interval of parameter input and a command is re-
		ceived, all subsequent receive interrupts are displaced. If this occurs, send an
		enquiry command to read all the accumulated receive data.
	3.	When a parameter is input, no check is made that the parameter is in the per-
		mitted range. Make sure that parameters are input within the permitted range.

￿￿￿