Omron V022-E3-1 operation manual SECTION Hardware Settings and Connections

SECTION 3

Hardware Settings and Connections

This section describes the settings of the NT600S, connections to a PC/Host, and other hardware settings.

3-1 Description of Parts and Settings	24
3-1-1 Description of Parts	24
3-1-2 DIP Switch Settings	26
3-2 Installation	27
3-2-1 Installation to the Operation Panel	27
3-2-2 Power Supply Connection	28
3-2-3 Grounding	29
3-3 Connecting to the Support Tool	30
3-4 Connection to a PC by the Host Link	31
3-4-1 Compatible PCs	31
3-4-2 Connecting the NT600S	32
3-4-3 PC Switch Settings	34
3-5 Connection to a PC by the NT Link (1:1)	43
3-5-1 Compatible PCs	43
3-5-2 Connecting the NT600S	44
3-5-3 PC Switch Settings	45
3-6 Connection to a PC by the NT Link (1:N)	47
3-6-1 Compatible PCs	47
3-6-2 Connecting the NT600S Units	47
3-6-3 PC Switch Settings	55
3-7 Connecting to the PC with C200H Direct Communication	56
3-7-1 Compatible PCs	56
3-7-2 Connection Method	59
3-8 Host Connections by RS-232C	63
3-8-1 Host Computer Communication Settings	63
3-8-2 Connector Pin Arrangement	63

￿￿