4-6-3 Setting Unit Numbers (NT Link 1:N Only)

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿-￿￿￿￿￿￿$￿0&￿￿￿￿1￿￿￿￿￿￿￿.￿￿￿￿￿￿-￿￿￿￿￿￿ Section 3-6

[ MEMORY SWITCH MENU (1/2) ]

Comm. Method

Host Link

EXIT

 

Key Press Sound

OFF

NEXT

Buzzer Sound

OFF

PAGE

Putting-Out Time

None

SAVE

Resume Function

ON

Support Tool Mode

NT600S

EXIT

 

Select “NEXT PAGE”.

If the communication method is not displayed as host link, press “Comm. Method” to select “Host Link”.

[ MEMORY SWITCH MENU (2/2) ]

 

EXIT

Automatic Reset

ON

Host Link Speed

19200bps PREV.

 

PAGE

SAVE

EXIT

Each time the “Host Link Speed” touch switch is pressed, the set- ting option “9600 bps” alternates with “19200 bps”.

To set and quit the menu, press the [SAVE EXIT] touch switch. To quit without set- ting, press [EXIT].

4-6-3 Setting Unit Numbers (NT Link 1:N Only)

When using NT600S with the NT link (1:N) communication method, set unit num- bers.

When using NT link (1:N), unit numbers are used to identify each of the multiple PTs connected to a single PC port. Set a different unit number for each of the PTs connected to the port.

The unit numbers that can be set differ in accordance with the type of host PC as follows.

C200HE

:Unit Nos. 0 to 3

C200HG, C200HX

:Unit Nos. 0 to 7

Set the unit numbers by following the menu operation from the System Menu de- scribed below.

[ SYSTEM MENU ]

Quit

Transmit Mode Maintenance Mode

Select “Maintenance Mode”.

￿￿

Page 101
Image 101
Omron V022-E3-1 operation manual 4-6-3Setting Unit Numbers NT Link 1:N Only