Omron V022-E3-1 operation manual $& Section, Connecting to a PC with a 9-pinConnector

To connect to communication port 1

￿￿￿￿￿￿￿￿￿￿￿￿￿$￿￿￿￿￿&￿￿￿'￿￿( Section 2-4

Connecting to a PC with a 9-pin Connector

Use a connector cable with a 9-pin connector on both ends to connect the NT600S to a PC with a 9-pin connector.

NT600S	Host link unit/CPU unit
	SYSMAC C series
	PC, CVM1/CV
	series PC

	9-pin connector		Host I/F connector	9-pin connector
			(RS-232C 9-pin type)
			RS-232C connector cable
Note
		The connector cable wiring for the C series CPU unit (C			H) is different from that
		for the other PCs. For details, refer to Appendix E Method for Making the Cable for
		Connection to the PC/Host (page 264).

Connecting the NT600S to a CVM1/CV Series Host Link Unit

Communications port 1

(RS-232C)
Communications
port 2	I/O port
(RS-232C/
	selector
RS-422A)	switch
	RS-232C
	↔
	RS-422A

Two types of connectors are provided to CV500-LK201 host link unit. Both of these connector types can connect to the NT600S with an RS-232C connector cable. ￿Select the connector cable which matches the connector type.

This is a 25-pin RS-232C connector. Use a connector cable with a 25-pin con-

￿nector on one end and a 9-pin connector on the other end (NT600S side). To connect to communication port 2

This is a 9-pin RS-232C/RS-422A connector. Use a connector cable with a 9-pin connector on both ends.

Set the I/O port selector switch to the RS-232C side (upper side) to use this port.

Connecting the NT600S to a C Series CQM1 Unit

CQM1 can connect to the NT600S by the RS-232C method. Use an RS-232C ￿9-pin type connector cable.

To connect to the RS-232C port

This is a 9-pin RS-232C connector. Use a connector cable with a 9-pin connector on both ends.

Connecting to C Series C200HX/HG/HE

When using C series C200HX/HG/HE models, the NT600S can be connected to the standard port of the CPU unit, or to ports A and B of the expansion communica- tion board. Procure an RS-232C type connection cable for the connection. For details on the specifications, installation method, etc., of the communication board used for the connection, refer to the “SYSMAC C200HX/HG/HE Installation Guide” (W302-E1-￿).

￿￿