Omron V022-E3-1 7-2Commands Sent by the Host, 7-2-1Displaying the Screen, Section, bithexadecimal

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿&￿￿￿ Section 6-2

7-2 Commands Sent by the Host

The operating commands sent by the Host are described below.

Note All data values must be sent in ASCII code.

Example:

m1 m2

2-bit hexadecimal	5AH
3-bit BCD	123

35	41
d1	d2	d1
31	32	33

7-2-1 Displaying the Screen

This section describes the procedure for screen display by the Host and also that for checking the displayed screen. For details on the screen display function of the NT600S, refer to 5-2 Outline of Functions (page 119) and 5-3 Screen Display (page 124).

Switching the Display Screen

By sending a command from the Host, the specified screen is displayed.

If a screen number is specified by the Host using the following command, the dis- play screen is switched to the corresponding screen (screen number: 1 to 1000). ￿Screen number 0 is a white screen (no display).

Continuous screens and overlapping screens

- To display continuous screens or overlapping screens, it is necessary to speci- fy a parent screen. If a child screen is specified, only the specified screen is displayed.

Reference For continuous screens and overlapping screens, refer to 5-3 Screen Display (page 124).

Display Specified Screen

Format

[ESC] 0 m1 m2 m3 m4

1B

30

	m1m2m3m4: Number of displayed screen (4-digit hexadecimal)
	0000: No display
	0001 to 03E8H: Screen #1 to #1000
Description	The specified screen is displayed on the NT600S when a screen number is sent
	from the Host with this command.

￿￿￿