ZyXEL Communications Log Commands, Configuring What You Want the G-1000 to Log, Sys log, Type

G-1000 User’s Guide

Table 85 ICMP Notes (continued)

TYPE	CODE	DESCRIPTION
	1	Redirect datagrams for the Host
	2	Redirect datagrams for the Type of Service and Network
	3	Redirect datagrams for the Type of Service and Host
8		Echo
	0	Echo message
11		Time Exceeded
	0	Time to live exceeded in transit
	1	Fragment reassembly time exceeded
12		Parameter Problem
	0	Pointer indicates the error
13		Timestamp
	0	Timestamp request message
14		Timestamp Reply
	0	Timestamp reply message
15		Information Request
	0	Information request message
16		Information Reply
	0	Information reply message

Table 86 Sys log

LOG MESSAGE	DESCRIPTION
Mon dd hr:mm:ss hostname	This message is sent by the "RAS" when this syslog is generated. The
src="<srcIP:srcPort>"	messages and notes are defined in this appendix’s other charts.
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"

Log Commands

Go to the command interpreter interface (the Command Interpreter Appendix explains how to access and use the commands).

Configuring What You Want the G-1000 to Log

Use the sys logs load command to load the log setting buffer that allows you to configure which logs the G-1000 is to record.

Log Descriptions 181