ZyXEL Communications G-1000 Note If wireless station authentication is done using a RADIUS, Label

G-1000 User’s Guide

Figure 21 Wireless LAN: 802.1x/WPA for 802.1x Protocol

The following table describes the labels in this screen.

Table 17 Wireless LAN: 802.1x/WPA for 802.1x Protocol

LABEL	DESCRIPTION
Wireless Port	To control wireless stations access to the wired network, select a control method
Control	from the drop-down list box. Choose from No Authentication Required,
	Authentication Required and No Access Allowed.
	No Authentication Required allows all wireless stations access to the wired
	network without entering usernames and passwords. This is the default setting.
	Authentication Required means that all wireless stations have to enter
	usernames and passwords before access to the wired network is allowed.
	No Access Allowed blocks all wireless stations access to the wired network.
	The following fields are only available when you select Authentication Required.
ReAuthentication	Specify how often wireless stations have to reenter usernames and passwords in
Timer (In	order to stay connected. This field is activated only when you select
Seconds)	Authentication Required in the Wireless Port Control field.
	Enter a time interval between 10 and 9999 seconds. The default time interval is
	1800 seconds (30 minutes).
	Note: If wireless station authentication is done using a RADIUS
	server, the reauthentication timer on the RADIUS server has
	priority.
Idle Timeout	The G-1000 automatically disconnects a wireless station from the wired network
(In Seconds)	after a period of inactivity. The wireless station needs to enter the username and
	password again before access to the wired network is allowed.
	This field is activated only when you select Authentication Required in the
	Wireless Port Control field. The default time interval is 3600 seconds (or 1 hour).
Key Management	Choose 802.1x from the drop-down list.
Protocol

Chapter 6 Wireless LAN 63