ZyXEL Communications manual G-1000 User’s Guide Menu 23.2 System Security RADIUS Server, Field

G-1000 User’s Guide

Figure 65 Menu 23.2 System Security: RADIUS Server

Menu 23.2 - System Security - RADIUS Server

Authentication Server:

Active= Yes

Server Address= 192.168.1.1

Port #= 1812

Shared Secret= ********

Accounting Server:

Active= Yes

Server Address= 192.168.1.3

Port #= 1812

Shared Secret= ********

The following table describes the fields in this menu.

Table 48 Menu 23.2 System Security: RADIUS Server

FIELD	DESCRIPTION
Authentication Server
Active	Press [SPACE BAR] to select Yes and press [ENTER] to enable user
	authentication through an external authentication server.
Server Address	Enter the IP address of the external authentication server in dotted decimal
	notation.
Port	The default port of the RADIUS server for authentication is 1812.
	You need not change this value unless your network administrator instructs
	you to do so with additional information.
Shared Secret	Specify a password (up to 31 alphanumeric characters) as the key to be
	shared between the external authentication server and the access points.
	The key is not sent over the network. This key must be the same on the
	external authentication server and G-1000.
Accounting Server
Active	Press [SPACE BAR] to select Yes and press [ENTER] to enable user
	authentication through an external accounting server.
Server Address	Enter the IP address of the external accounting server in dotted decimal
	notation.
Port	The default port of the RADIUS server for accounting is 1813.
	You need not change this value unless your network administrator instructs
	you to do so with additional information.
Shared Secret	Specify a password (up to 31 alphanumeric characters) as the key to be
	shared between the external accounting server and the access points.
	The key is not sent over the network. This key must be the same on the
	external accounting server and G-1000.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Chapter 16 System Security 113