ZyXEL Communications G-1000 User’s Guide, Remote Management SNMP, Remote Management Screens

G-1000 User’s Guide

Table 30 Remote Management: SNMP

LABEL	DESCRIPTION
Set Community	Enter the Set community, which is the password for incoming Set requests
	from the management station. The default is public and allows all requests.
Trap
Community	Type the trap community, which is the password sent with each trap to the
	SNMP manager. The default is public and allows all requests.
Destination	Type the IP address of the station to send your SNMP traps to.
SNMP
Service Port	You may change the server port number for a service, if needed; however, you
	must use the same port number in order to use that service for remote
	management.
Service Access	Select the interface(s) through which a computer may access the G-1000 using
	this service.
Secured Client IP	A secured client is a “trusted” computer that is allowed to communicate with the
Address	G-1000 using this service.
	Select All to allow any computer to access the G-1000 using this service.
	Choose Selected to just allow the computer with the IP address that you specify
	to access the G-1000 using this service.
Apply	Click Apply to save your customized settings and exit this screen.
Reset	Click Reset to begin configuring this screen afresh.

80 Chapter 8 Remote Management Screens