ZyXEL Communications G-1000 manual Configuring FTP

G-1000 User’s Guide

Figure 30 Remote Management: Telnet

The following table describes the labels in this screen.

Table 26 Remote Management: Telnet

LABEL	DESCRIPTION
Server Port	You may change the server port number for a service, if needed; however, you must
	use the same port number in order to use this service for remote management.
Server Access	Select the interface(s) through which a computer may access the G-1000 using this
	service.
Secured Client IP	A secured client is a “trusted” computer that is allowed to communicate with the G-
Address	1000 using this service.
	Select All to allow any computer to access the G-1000 using this service.
	Choose Selected to just allow the computer with the IP address that you specify to
	access the G-1000 using this service.
Apply	Click Apply to save your customized settings and exit this screen.
Reset	Click Reset to begin configuring this screen afresh.

8.5 Configuring FTP

You can upload and download the G-1000’s firmware and configuration files using FTP, please see the chapter on firmware and configuration file maintenance for details. To use this feature, your computer must have an FTP client.

To change your G-1000’s FTP settings, click REMOTE MGMT, then the FTP tab. The screen appears as shown.

Chapter 8 Remote Management Screens 75